How to use Erico wall-hung boiler
As winter approaches, the frequency of use of wall-hung boilers gradually increases. Erico wall-mounted boilers are favored by many families because of their high efficiency, energy saving and easy operation. This article will introduce in detail how to use the Erico wall-mounted boiler to help users better master its operating skills and ensure safe and efficient use.
1. Introduction to the basic functions of Erico wall-hung boiler
Erico wall-mounted boiler is a household equipment that integrates heating and domestic hot water. It has the following main functions:
| Function | Description |
|---|---|
| heating | Homes are heated by burning natural gas or liquefied gas. |
| domestic hot water | Provide instant hot water to meet daily washing, bathing and other needs. |
| Energy saving mode | The power can be adjusted according to needs to save energy consumption. |
| Security protection | It has multiple protection functions such as anti-freeze, overheating, and leakage. |
2. How to use the Erico wall-hung boiler
The following are the specific steps for using the Erico wall-hung boiler:
| steps | Operating Instructions |
|---|---|
| 1. Start preparation | Make sure the power is on, the gas valve is open, and the water pressure is between 1-2bar. |
| 2. Power-on operation | Press the power button, the screen will display the startup interface, select heating or hot water mode. |
| 3. Temperature setting | Adjust the desired temperature through the control panel or remote control. It is recommended that the heating temperature is set to 18-22℃. |
| 4. Mode switching | Switch heating or domestic hot water mode as needed, and some models support dual-mode operation at the same time. |
| 5. Shutdown operation | Press and hold the power button for 3 seconds to put the wall-mounted boiler into standby mode. If you need to shut it down completely, you can close the gas valve. |
3. Precautions for use
In order to ensure the safe and efficient use of the Erico wall-mounted boiler, users need to pay attention to the following matters:
| Things to note | Description |
|---|---|
| Regular inspection | Check whether the water pressure is normal and whether the gas pipeline is leaking every month. |
| Cleaning and maintenance | Clean the heat exchanger and burner at least once a year to avoid dust accumulation that affects efficiency. |
| Antifreeze measures | When not using it for a long time in winter, you need to turn on the antifreeze mode or drain the water in the pipes. |
| Troubleshooting | If an abnormal alarm occurs, turn off the power immediately and contact professional maintenance personnel. |
4. Frequently Asked Questions
The following are common problems and solutions that users may encounter when using ARIC wall-mounted boilers:
| question | Solution |
|---|---|
| Wall mounted boiler cannot start | Check whether the power supply and gas are normal and whether the water pressure is between 1-2bar. |
| Hot water temperature is unstable | It may be that the water pressure is too low or the heat exchanger is clogged. You need to adjust the water pressure or clean the heat exchanger. |
| Poor heating effect | Check whether the radiator is blocked, or adjust the power of the wall-mounted boiler to a higher level. |
| Display alarm | Check the manual according to the alarm code, or contact the after-sales service center. |
5. Summary
Erico wall-mounted boiler is a powerful and easy-to-operate household device. Correct use can not only improve the comfort of life, but also extend the life of the device. Users should strictly follow the instructions during use, perform regular maintenance, and contact professionals promptly when encountering problems. I hope this article can help you better master the use of Erico wall-mounted boilers and enjoy a warm and comfortable winter life.
check the details
check the details
en
